Disaster Recovery in Windows Server 2003 – SAN and NAS

Introduction to SAN and NAS Disaster recovery strategies

Imagine this scenario, the disk is the bottleneck on your database server.  At this time you are also investigating disaster recovery options.  Storage Area Network (SAN) would solve both problems by delivering fibre optic speed and a separate secure storage for your data.  Incidentally, you often need 2 or 3 reasons before you embrace any new technology.

SAN and NAS could be deployed separately, but working together, SAN provides fast scalable storage while NAS provides clustering gives file level access to the data.  More and more, SAN and NAS will be thought of as an inseparable pair, like ‘TCP/IP’.

SAN and NAS Disaster Recovery Topics

  ‡

Direct Attached Storage (DAS)

DAS is an acronym that has been invented to describe a hard drive.  I just mention this way of thinking of your discs because it provides a baseline for performance when you look at alternative storage devices like NAS and SAN.

Storage Area Network (SAN)

Because departments are better at collecting information, there is increasing pressure on the administrator to maintain a fast network, while keeping the data secure.  SAN is a great answer to data management overload.

SAN Storage in Windows Server 2003The SAN disk storage subsystem connects to the server through a Fibre Channel.  This channel has a HBA (Host Bus Adapter) on the server connecting fibre-optic cables to the switching device, and finally on to the storage area.

Conceptually, a SAN is a separate arrat of storage devices.  Think of a SAN as a separate back-end network which is dedicated to data storage.

The advantages of SAN is that you can make server-less backup.  This not only removes the load from the server, but also eliminates network traffic during backup.

  I once asked a professor of Botany the best way of growing tomato seeds, he said, ‘Guy read the packet, it’s in the gardener’s interest to give you the very best information on growing their seeds right there on the packet’.  The relevance here is, if you want to know the technical specification for SAN,  then who better to contact than the manufacturers.

Guy Recommends:  A Free Trial of the Network Performance Monitor (NPM)Review of Orion NPM v12 v12

SolarWinds’ Network Performance Monitor will help you discover what’s happening on your network.  This utility will also guide you through troubleshooting; the dashboard will indicate whether the root cause is a broken link, faulty equipment or resource overload.

Perhaps the NPM’s best feature is the way it suggests solutions to network problems.  Its second best feature is the ability to monitor the health of individual VMware virtual machines.  If you are interested in troubleshooting, and creating network maps, then I recommend that you give this Network Performance Monitor a try.

Download your free trial of SolarWinds Network Performance Monitor.

Network Attached Storage (NAS)

Think of NAS as your gateway to the SAN.  The NAS devices bring an extra level of fault tolerance to the network.  With hard disks, if the server is down then data cannot be accessed by the clients, but with NAS, the data is still available on the network and accessible by clients. You can also use RAID tactics with NAS and so ensure that the NAS device is not a single point of failure.

NAS (Network Attached Storage) is a data storage mechanism that uses devices connected directly to the network media.  Each device has its own IP address and is connected to the server which acts as a gateway to the data.

The advantage of NAS structure is that it means that you can have different operating systems connected to a centralised storage area.  Another plus is the improved management, backup and physical security of your data.  One simple example of NAS is a CD-ROM ‘jukebox’ that are connected directly to the network.

SCSI and Fibre Channel

These are the two mechanisms for connecting the server to the data stores.  Fibre Channel as expected uses Fibre optic and is serial in nature.  SCSI uses ethernet and is parallel in operation.  The situation is that Fibre Channel is expected to replace SCSI because of its speed and scalability.  Fibre Channel has its own switches and protocol and uses the HBA (Host Bus Adapter) as a replacement for the SCSI adapter.  SCSI is not giving up the battle and you may see iSCSI a faster internet version.

Monitor Your Network with the Real-time Traffic AnalyzerSolarwinds Real-time Traffic Analyzer

The main reason to monitor your network is to check that your all your servers are available.  If there is a network problem you want an interface to show the scope of the problem at a glance.

Even when all servers and routers are available, sooner or later you will be curious to know who, or what, is hogging your precious network’s bandwidth.  A GUI showing the top 10 users makes interesting reading.

Another reason to monitor network traffic is to learn more about your server’s response times and the use of resources.  To take the pain out of capturing frames and analysing the raw data, Guy recommends that you download a copy of the SolarWindsfree Real-time NetFlow Analyzer.

Logical Unit Numbers (LUNs)

Storage subsystems have an IP address on their I/O bus (SCSI ID or HBA).  Inside the storage system will be arrays of disks.  Areas on these disks are accessed buy their LUN (Logical Unit Number).  LUN security is a feature of the storage subsystem, which limits access to HBAs.  Access to a given LUN is granted based on the WorldWide Name (WWN) of the Host Based Adapter (HBA).

A server device name is bound to a LUN through a specific HBA and eight-byte storage port WWN.  Each server HBA is explicitly bound to a storage volume or LUN and access is explicitly authorized.

 

Exchange

Users

Disk 1

Disk 2

Disk 3

Disk 4

Disk 5

Disk 6

Disk 7

Disk 8

Disk 9

Disk 10

Disk 11

Disk 12

Disk 13

Disk 14

500 – 1000

EDB and public folder

RAID 5

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

EDB and public folder

RAID 1+0

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

1500 – 2000

EDB and public folder

RAID 5

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

EDB and public folder

RAID 1+0

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

3000

EDB and public folder

RAID 5

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

EDB and public folder

RAID 1+0

log files

RAID 1+0

NAS LUNS

RAID 5,1+0, or ADG

Windows Storage Server is designed to ‘house’ your NAS,see more here

If you like this page then please share it with your friends

 


More Topics for Disaster Recovery in Server 2008