Activate the Local Administrator – Active:Yes

How to Activate the Local Administrator – Active:Yes

Windows Server 2008 has a hidden administrator account.  This super-user account is only of use on a member server where you normally logon to the domain, but now need to logon to the local ‘SAM’ database.  The method toactivate the administrator is almost identical of that for Vista; the only difference that springs to mind is that in Windows Server 2008 people are more likely to deactivate than to activate this account.

Topics for Activating the Windows Server 2008 Local Administrator


How to Activate or Deactivate the Hidden Administrator

If you are going to activate and use this administrator account, then you need to know its password.  Therefore a preliminary step is to set, and especially to remember, the password.  Naturally, if all you want to is deactivate you don’t need to worry about the password, and thus could avoid this step.

Quick method to activate an account

  1. Logon to your Windows Server 2008 using another account with administrative privileges.
  2. Launch the cmd prompt – Make sure you select, ‘Run as administrator’
  3. Net user administrator p@$$w0rD
  4. Net user administrator /active:yes
  5. Switch User, or logoff
  6. Logon as administrator  Password p@$$w0rD 
    To be precise, you need to be HostName/administrator not Domain/Administrator

Detailed Instructions to Activate the Administrator

  1. Logon to the server using your normal domain admin username and password.
  2. Click on the Start button
  3. Click on Start Search. 
  4. Type: cmd. 
  5. Right-click cmd, select ‘Run as administrator’ from the shortcut menu.
  6. At the command line type:
    Net help user
  7. My idea is for you to just observe Net User options.  In particular, check the syntax to set the password.
  8. The next instruction is the crucial command.  I have chosen password = p@ssworD, you may want to choose a different password.
  9. Net user administrator p@$$w0rD
  10. Net user administrator /active:yes
  11. Check the message : The command completed successfully
  12. Switch User, or logoff
  13. Logon as Hostname/Administrator  Password p@$$w0rD  (Your password may be different!)
    Where Hostname is the computer name of the Windows Server 2008 computer.

Trap1:  You need a forward-slash before /active

     Net user administrator active:yes    is wrong
     Net user administrator /active:yes    is correct

Trap2:  There should be no space between the word ‘active’ and the ‘:’.

    /active  :yes   is wrong.  
    /active:yes     is correct.

Tip 1:  You can also activate and deactivate the guest account.

Tip 2: The key word in the deactivate command is the word:no

     Net user administrator /active:no.

Guy Recommends:  A Free Trial of the Network Performance Monitor (NPM)Review of Orion NPM v12 v12

SolarWinds’ Network Performance Monitor will help you discover what’s happening on your network.  This utility will also guide you through troubleshooting; the dashboard will indicate whether the root cause is a broken link, faulty equipment or resource overload.

Perhaps the NPM’s best feature is the way it suggests solutions to network problems.  Its second best feature is the ability to monitor the health of individual VMware virtual machines.  If you are interested in troubleshooting, and creating network maps, then I recommend that you give this Network Performance Monitor a try.

Download your free trial of SolarWinds Network Performance Monitor.

Local Security Method to Enable the Administrator Account
Kindly sent in by Dave Waddell

If you prefer a pure GUI method, launch the Local Security policy.

This is how you navigate to the Local Security Policy. 

  1. Click on Start orb, then in the Start Search dialog box type: secpol.msc.  Note: you must include the extension .msc.
  2. Drill down to Local Policy, Security Options
  3. Double click Accounts: Administrator account status, and select enable.

Activate Server Administrator Account active:yes

You can also see the resulting Administrator in the Control Panel, User Accounts folder.

Benefits of Activating Windows Server 2008’s Hidden Administrator Account

The main benefit of activating this hidden Administrator is if you ever needed to logon at the server when the domain was not available and not accepting cached credentials.   Alternatively, you may be troubleshooting and wish to eliminate domain settings.  To be frank, there are always other scenarios that I have not thought about.  Sometimes when troubleshooting you need a combination of unusual techniques to finally solve your problem.

Actually, the main benefit of knowing this method is to make sure that youdeactivate the special built-in local administrator account.  To achieve this try:

Net user administrator /active:no.

Guy Recommends: SolarWinds Free Network Bandwidth MonitorFree Real-Time Bandwidth Monitor

This freeware monitor is great for checking whether your network’s load-balancing is performing as expected, for example, are two interfaces are getting about equal traffic?

It’s easy to install and straightforward to configure. You will soon be running tests to see how much network bandwidth your applications consume.

The GUI has a lovely balance between immediate network traffic data in the middle, combined with buttons to seek related data and configuration settings. Give this monitor a try, it’s free! 

Download your free network bandwidth monitor

If you need more comprehensive network analysis software:
Download a free trial of NPM (Network Performance Monitor)

How to Check Windows Server 2008’s Local User Accounts

Checking the Local User accounts is a useful task in itself, but it comes into its own where you need to troubleshoot whether accounts are active, or not.  In a nutshell, if you type /active:yes the account should display in the GUI.  If you type /active:no, the account disappears from view.

This is where you can configure Windows Server 2008 local as opposed to domain accounts.  Click on the Start button, Control Panel and select –> User Accounts:

Trap: Before you can make ANY changes to ANY account, you must make sure that this box is ticked:
‘Users must enter a user name and password to use this computer’.   See screenshot below (Taken from Vista).

Check Windows Server 2008 Local User Accounts

If you do deactivate the local administrator, then you simply won’t see the account listed in the User Accounts menu in the Control Panel.

Summary of Activating the Local Administrator

One reason to activate the hidden Vista Administrator account is for logging on locally when you are troubleshooting.  The procedure is straightforward, just launch the cmd prompt and type:
Net user administrator /active:yes.  

The only trap is that you require a complex password so that you need to add a password to the command string thus
Net user administrator p@$$w0rD
Net user administrator /active:yes

If you like this page then please share it with your friends


Microsoft Windows Server 2008 Topics:

Server 2008 Home   • Overview   • What’s New?   • Migration Advice   • Install   • SP1 Review

AD DC   • Roles   • Features   • Editions   • Hyper-V   • UAC   • IPv6   • Group Policy   • Free NPM Trial